Welcome to INTI International University's Research Publications in the Engineering & Innovation Technology category. Our publications showcase groundbreaking research and advancements in various engineering fields. Explore the cutting-edge work of our faculty and researchers in areas such as robotics, materials science, renewable energy, environmental engineering, water management and waste management, geotechnics and transportation, sustainable manufacturing, plasma research, superconducting, and more. Stay up to date with the latest trends and innovations shaping the future of technology. Each publication entry provides a link, allowing you to delve into the research that captures your interest. Start exploring today and unlock the potential of engineering and technology at INTI International University.

2025 | 2024 | 2023 | 2022 | 2021 | 2020 | 2019

---

 

Insights into the photocatalytic removal of malachite green organic pollutant by highly efficient hard responsive Ba1 − xCoxDyyFe12−yO19 catalysts
Himanshi, Lal B., Verma A., Suman, Ahmed J., Singh A., Choon Kit C., Jasrotia R., Lakshmaiya N., Mehra V., Kandwal A.
Scientific Reports [Click here to view the article]

 

Analysis of a Shear beam model with suspenders in thermoelasticity of type III
Chabekh M., Chougui N., Torres D.F.M.
Journal of Computational and Applied Mathematics [Click here to view the article]

 

Structural performance of lightweight fibre-reinforced oil palm shell concrete subjected to impact loadings under varying boundary conditions
Ja'e I.A., Muda Z.C., Syamsir A., Amaechi C.V., Almujibah H., Elshekh A.E.A., Bashir M.O., Almaliki A.H.
Case Studies in Construction Materials [Click here to view the article]

 

Emerging EM wave sensors for non-invasive glucose monitoring: Review, techniques and developments
Dutt S., Thakur R., Kandwal A., Kumar P., Jasrotia R., Lakshmaiya N., Liu L.W., Kumar S., Luadang B., Kit Chan C.
Sensors and Actuators Reports [Click here to view the article]

 

Sm3+ single-doped LaGaO3 perovskite phosphor with color-tunable luminescence for multimodal applications
Li X., Xie W., Yan Y., Qi G., Cao Y., Lai M.Y., Tiu Z.C.
Optics and Laser Technology [Click here to view the article]

 

Effect of atomic ratio of ions on the particle diffusion and permeability of carbon nanotubes in reverse electrodialysis process using molecular dynamics simulation
Ali A.B.M., Qader K.H., Al-Zahiwat M.M., Sawaran Singh N.S., Salahshour S., Mohammad Sajadi S., Mokhtarian A.
Case Studies in Chemical and Environmental Engineering [Click here to view the article]

 

Novel sandwich like interfacial engineering of Cu NPs on CuAl2O4 anchored Bi4O5Br2 nanoflower Z-scheme nano-heterojunction for enhanced photocatalytic degradation of doxycycline and tetracycline
Subhiksha V., Steffy J.P., Syed A., Elgorban A.M., Abid I., Wong L.S., Khan S.S.
Journal of the Taiwan Institute of Chemical Engineers [Click here to view the article]

 

Stabilize the oxygen vacancies in CuFe2O4 via altering local electronic structure by Co doping: Critical role of Co doping and photo-Fenton degradation of chloramphenicol
Khan S.S., Sre V.V., Swedha M., Syed A., Elgorban A.M., Abid I., Wong L.S.
Journal of the Taiwan Institute of Chemical Engineers [Click here to view the article]

 

Design, Fabrication, and Performance Testing of PMMA Interference Screws Prepared by 3D Printing Methods
Ismail R., Fitriyana D.F., Bayuseno A.P., Priwintoko B., Subagyo Y., Afrizal M., Jamari J., Siregar J.P., Cionita T., Jaafar J.
Journal of Advanced Research in Applied Mechanics [Click here to view the article]

 

Facet engineering in Au nanoparticles buried in Cu2O nanocubes for enhanced catalytic degradation of rhodamine B and larvicidal application
Steffy J.P., Syed A., Kamaraj C., Naveenkumar S., Thomas A.M., Elgorban A.M., Abid I., Raju L.L., Wong L.S., Khan S.S.
Sustainable Materials and Technologies [Click here to view the article]

 

Effect of different electrolytes on the efficient performance of δ-MnO2 electrode for supercapacitor applications
Kore A.E., Kore E.K., Gavande S.S., Molane A.C., Mulik R.N., Krishnan K., Patil V.B.
Materials Science and Engineering: B [Click here to view the article]

 

3-E analysis of a hybrid multigeneration carbon-free process based on the integration of Allam-Z cycle and CO2 electroreduction cell
Zhang D., Farajollahi A., Basem A., Shami H., Muzammil K., Islam S., Zainul R.
Renewable Energy [Click here to view the article]

 

The impact of the green technology on the renewable energy innovation: Fresh pieces of evidence under the role of research & development and digital economy
Dogan B., Nketiah E., Ghosh S., Nassani A.A.
Renewable and Sustainable Energy Reviews [Click here to view the article]

 

Explainable Artificial Intelligence for predicting the compressive strength of soil and ground granulated blast furnace slag mixtures
Mohammed A.M.A., Husain O., Abdulkareem M., Mohd Yunus N.Z., Jamaludin N., Mutaz E., Elshafie H., Hamdan M.
Results in Engineering [Click here to view the article]

 

Energy management of a microgrid with integration of renewable energy sources considering energy storage systems with electricity price
Hai T., Singh N.S.S., Jamal F.
Journal of Energy Storage [Click here to view the article]

 

Stabilize the oxygen vacancies in ZnO via altering local electronic structure by Co and Ni doping: A novel strategy for achieving durable visible light driven photo-Fenton degradation of chloramphenicol
Brindha B., Syed A., Balakrishnaraja R., Elgorban A.M., Abid I., Wong L.S., Khan S.S.
Colloids and Surfaces A: Physicochemical and Engineering Aspects [Click here to view the article]

 

Construction of di-functional BiOCl/LaNi4Fe for enhanced photodegradation of levofloxacin under visible light exposure
Nazeer Ali Z.S., Syed A., Janani B., Elgorban A.M., Abid I., Wong L.S., Khan S.S.
Chemical Engineering Science [Click here to view the article]

 

Enhanced adsorption of Fe(II) from synthetic wastewater using modified bentonite: Isotherms, kinetics, thermodynamics, and adsorption mechanisms
Khandamov D.A., Kurniawan T.A., Bekmirzayev A.S., Batool F., Khandamova D., Nurullayev S., Kholikova S., Babakhanova Z., Hayet Khan M.M.
Microporous and Mesoporous Materials [Click here to view the article]

 

A dual-band microwave sensor for glucose measurements utilizing an enclosed split ring metamaterial-based array
Kandwal A., Ju Z., Liu L.W.Y., Jasrotia R., Chan C.K., Nie Z., Almuhlafi A.M., Vettikalladi H.
Engineering Science and Technology, an International Journal [Click here to view the article]

 

Integrative data-driven analytics for assessing ecological and human health risks of soil heavy metal contamination
Ejaz U., Khan S.M., Shah S.F.A., Khalid N., Jehangir S., Rizvi Z.F., Svenning J.-C.
Journal of Hazardous Materials Advances [Click here to view the article]

 

Assessing the engineering properties and environmental impact with explainable machine learning analysis of sustainable concrete utilizing waste banana leaf ash as a partial cement replacement
Momshad A.M., Islam M.H., Datta S.D., Sobuz M.H.R., Aayaz R., Kabbo M.K.I., Khan M.M.H.
Cleaner Engineering and Technology [Click here to view the article]

 

Synthesis of novel advanced squaraine dyes for improved efficiency in dye-sensitized solar cells
Alkabli J., Almulaiky Y.Q., Al-horaibi S.A.
Applied Materials Today [Click here to view the article]

 

Drought modelling and forecasting using shallow and deep machine learning techniques
Alkubaisi H., Danandeh Mehr A., S A., Khan M.M.H.
Modeling Earth Systems and Environment [Click here to view the article]

 

Investigating the effect of copper oxide nanoparticles radius on thermal behavior of silica aerogel/paraffin nanostructure using molecular dynamics simulation
Ru Y., Ali A.B.M., Qader K.H., Singh N.S.S., Jhala R., Soliyeva M., Salahshour S., Esmaeili S.
International Communications in Heat and Mass Transfer [Click here to view the article]

 

Combating microplastic pollution in Malaysia's marine ecosystems using technological solutions, policy instruments, and public participation: A review
Goh K.C., Kurniawan T.A., Sarpin N., Masrom M.A.N., Othman M.H.D., Anouzla A., Aziz F., Ali I., Casila J.C., Khan M.I., Zhang D., Mahmoud M., Onn C.W.
Journal of Hazardous Materials Advances [Click here to view the article]

 

Optimal operation of diesel generator and battery energy storage system for total fuel cost minimization in hybrid power system
Damian S.E., Wong L.A., Shareef H., Chan C.K., Moh T.S.Y., Tiong M.C.
Journal of Power Sources [Click here to view the article]

 

Modification of opto-electrical behavior of polyvinyl chloride by infusion of SrTiO3 nanofiller synthesized via green route
Arun K.J., Muthukrishnan M., Manikanda Prabu V., Thiagamani S.M.K., Mahmoud M.H.
Journal of Applied Polymer Science [Click here to view the article]

 

Visible light induced photocatalytic degradation of norfloxacin using xC-TiO2
Adnan, Kalsoom, Zada F.M., Sarwat, Soonmin H., Khan B., Alamzeb M., Sun W., Ikram J., Rehman N.U.
Heliyon [Click here to view the article]

 

Navigating the nano-world future: Harnessing cellulose nanocrystals from green sources for sustainable innovation
Arockiasamy F.S., Manoharan B., Santhi V.M., Prakalathan K., Periasamy D., Dhandapani A., Natarajan V., Krishnasamy S., Thiagamani S.M.K., Ilyas R.A.
Heliyon [Click here to view the article]

 

A practical approach to teaching emerging technologies: a case of BIM
Adekunle S.A., Oyeyipo O., Aigbavboa C.O., Ebekozien A., Aliu J., Ejohwomu O.A.
Engineering, Construction and Architectural Management [Click here to view the article]

 

Prediction of Landslides Using Data Mining Techniques
Alazaidah R., Al-Batah M.S., Samara G., Alluwaici M., Safaqah M.A., Aljaidi M., Mohammad S.I., Vasudevan A., Zhang Y.
Applied Mathematics and Information Sciences [Click here to view the article]

 

Optimizing MIMO Antenna Performance Using Fuzzy Logic Algorithms
Mohammad S.I., Yogeesh N., Raja N., Chetana R., Ramesha M.S., Vasudevan A.
Applied Mathematics and Information Sciences [Click here to view the article]

 

Simple Preparation of Silver-Doped Strontium Bismuthates/Clay Nanocomposites for the Visible Light-Promoted Photocatalytic Efficiency, and Reactive Species Trapping Study
Zairov R.R., Syed A., Tawfiq M.M., Al-Hussainy A.F., Mansoor A.S., Radi U.K., Idan A.H., Bahair H., AL-Shwaiman H.A., Subramaniam M., Wong L.S., Janani B.J.
Journal of Inorganic and Organometallic Polymers and Materials [Click here to view the article]

 

Use calcium silicate filler to improve the properties of sago starch based degradable plastic
Dewi R., Sylvia N., Zulnazri Z., Riza M., Siregar J.P., Cionita T.
AIMS Environmental Science [Click here to view the article]

 

Engineering sulfur defect rich Vs-ZnS with sulfur vacancies modulated charge transfer for high performance photocatalytic degradation of levofloxacin
Sabariselvan L., Syed A., Steffy J.P., Elgorban A.M., Abid I., Wong L.S., Khan S.S.
Journal of Water Process Engineering [Click here to view the article]

 

Active faulting and seismicity, Northwest Pakistan: a case study of Peshawar Basin Pakistan
Faiz M.I., Ahmed S., Sr, Khan S.D., Rehman G., Khalid A., Ahmed S., Islam I., Kontakiotis G., Janjuhah H.T.
Environmental Earth Sciences [Click here to view the article]

 

Stabilize the oxygen vacancies in 2D bipyramidal CoFe2O4 via altering local electronic structure by SnSe for boosted photocatalytic degradation of ciprofloxacin: Interfacial engineering, mechanism insight and toxicological evaluation of byproducts
Sudheer Khan S., Vinotha Sre V., Raaja Rajeswari R., Syed A., Elgorban A.M., Alfagham A.T., Verma M., Wong L.S.
Surfaces and Interfaces [Click here to view the article]

 

A Reliability-Based Risk Analysis of a Roller Compacted Concrete Dam – A Case Study
Muda Z.C., Hafez M., Sidek L.M., Basri H., Almkahar Z., Zakaria A.
Applied Mathematics and Information Sciences [Click here to view the article]

 

Exposure the role of hydrogen with algae spirogyra biodiesel and fuel-borne additive on a diesel engine: An experimental assessment on dual fuel combustion mode
Aravind S., Barik D., Pullagura G., Chandran S.S.R., PV E., Paramasivam P., Balasubramanian D., Fouad Y., Soudagar M.E.M., Kalam M.A., Kit C.C.
Case Studies in Thermal Engineering [Click here to view the article]

 

Sulfur vacancies engineered self-supported CdCr2S4 as cascade nanoreactor for efficient photocatalytic degradation of rifampicin
Khan S.S., Steffy J.P., Swetha S., Syed A., Elgorban A.M., Alfagham A.T., Verma M., Wong L.S.
Journal of Water Process Engineering [Click here to view the article]

 

Influence of Sn4+ substitution on the Ba(Zn1/3Nb2/3)1-xSnxO3 (0 ≤ x ≤ 1) perovskites: Doping mechanism, structural and dielectric properties
Feng Y., Tan K.B., Sulaiman Y., Lim H.N., Chan K.Y., Chang S.K., Lu M., Han W.J.
Ceramics International [Click here to view the article]

 

Optimization of ethanol and methanol blends for enhanced performance and reduced emissions in BS-VI compliant motorbike engines
Dhairiyasamy R., Gabiriel D., Bunpheng W., Choon kit C.
Multiscale and Multidisciplinary Modeling, Experiments and Design [Click here to view the article]

 

Interfacial coupling of sandwich like Zn3V2O8/ZnO/NiCo2S4 nano-heterojunction for the enhanced photocatalytic degradation of rifampicin
Khan S.S., Sre V.V., Swedha M., Syed A., Elgorban A.M., Abid I., Wong L.S.
Materials Chemistry and Physics [Click here to view the article]

 

Computer-aided design of an electrode based on the Stone-Wales defected ZnO graphene-like monolayers for sodium-ion batteries
Hsu C.-Y., Alabada R., Ballal S., Chandra S., Kaur M., Sinha A., Zainul R., Hasan M.A., Islam S.
Materials Science in Semiconductor Processing [Click here to view the article]

 

In-situ topotactic synthesis and enhanced catalytic activity of shape-tuned Zn3(VO4)2@Ag nanocomposite
Sre V.V., Syed A., Elgorban A.M., Abid I., Wong L.S., Khan S.S.
Materials Science in Semiconductor Processing [Click here to view the article]

 

Corrosion Behavior of Aluminum in Fossil Diesel Fuel and Biodiesel From Chicken Eggshell-Alumina-Catalyzed Waste Cooking Oil
Popoola L.T., Agbo A.O., Taura U., Yusuff A.S., Asmara Y.P., Olagunju O.A., Chima O.M.
Materials and Corrosion [Click here to view the article]

 

Emerging contaminants in water: An overview of causes, metrics, and treatment methods
Natarajan E., Ramasamy G., Abdullah H., Sekar S.M., Abd Hamid A.R.
Sustainable Structural Materials: From Fundamentals to Manufacturing, Properties and Applications [Click here to view the article]

 

An experimental analysis of air flow-induced piezoelectric energy harvesting using flexible poly (vinylidene fluoride) nanocomposite films
Nivedhitha D.M., Jeyanthi S., Rithish B., Charan B.G.S., Ravi S., Vinayagamurthy G., Thiagamani S.M.K.
Discover Materials [Click here to view the article]

 

Performance prediction and optimization of a high-efficiency tessellated diamond fractal MIMO antenna for terahertz 6G communication using machine learning approaches
Nahin K.H., Nirob J.H., Taki A.A., Haque M.A., SinghSingh N.S., Paul L.C., Alkanhel R.I., Abdallah H.A., Ateya A.A., El-Latif A.A.A.
Scientific Reports [Click here to view the article]

 

Electrodeposited endeavour: Concentration-tuned nickel oxide nanostructures for high-performance supercapacitors
Pawar U.T., Molane A.C., Gavande S.S., Patil K.P., Mulik R.N., Krishnan K., Patil V.B.
Next Materials [Click here to view the article]

 

Microstructural behavior and explainable machine learning aided mechanical strength prediction and optimization of recycled glass-based solid waste concrete
Sobuz M.H.R., Kabbo M.K.I., Alahmari T.S., Ashraf J., GORGUN E., Khan M.M.H.
Case Studies in Construction Materials [Click here to view the article]

 

Non-local piezoelasticity to incorporate the influence of small-scale factors on the resonance behavior of the Mindlin piezoelectric polymeric nanoplates
Sawaran Singh N.S., Hassan W.H., Ameen Ahmed Z.M., Al-zahy Y.M.A., Salahshour S., Pirmoradian M.
Case Studies in Chemical and Environmental Engineering [Click here to view the article]

 

Strategies to harmonize two-dimensional Ce-MOF as self-template interfacial ensemble-induced catalysis towards the degradation of organic pollutants
Khan S.S., Steffy J.P., Syed A., Elgorban A.M., Abid I., Wong L.S.
Colloids and Surfaces A: Physicochemical and Engineering Aspects [Click here to view the article]

 

Evaluation of orthorhombic dialuminium dinitride as electrode material for Magnesium ion batteries
Zainul R., Mendoza Salazar M.J., Morales Gordon J.L., Kumar A., Thakur R., Jain B., Al-Musawi T., Islam S.
Inorganic Chemistry Communications [Click here to view the article]

 

Polarization state of light manipulation via MXene driven all optical modulator
Chang S.H., Tan S.J., Cheng X.S., Tiu Z.C., Ahmad F., Harun S.W.
Optical Fiber Technology [Click here to view the article]

 

Facile preparation of hybrid molybdenum dioxide/NiMn2O4 nanocomposites with two substrate matrixes for the assisted photo-degradation, oxygen evolution reaction and antimicrobial performances
Zairov R.R., Syed A., Elgorban A.M., Subramaniam M., Wong L.S., Janani B.J., Sinyashin O.G.
Colloids and Surfaces A: Physicochemical and Engineering Aspects [Click here to view the article]

 

Optimizing the thermostat setting points of residential and insulated buildings in the direction of economic efficiency and thermal comfort through advanced multi-purpose techniques
He P., Ali A.B.M., Hussein Z.A., Singh N.S.S., Bains P.S., Saydaxmetova S., Baghoolizadeh M., Salahshour S., Alizadeh A.
Energy and Buildings [Click here to view the article]

 

Modeling the effects of pressure and magnetic field on the phase change of sodium sulfate/magnesium chloride hexahydrate in nanochannels
Ali A.B.M., Hussein R.A., Singh N.S.S., Salahshour S., Pirmoradian M., Mohammad Sajadi S., Deriszadeh A.
International Journal of Thermofluids [Click here to view the article]

 

The effect of copper oxide nanoparticles on the thermal behavior of silica aerogel/paraffin as a phase change material in a cylindrical channel with molecular dynamics simulation
Yang J., Ali A.B.M., Al-zahy Y.M.A., Sawaran Singh N.S., Al-Bahrani M., Orlova T., Rahimi M., Salahshour S., Esmaeili S.
Progress in Nuclear Energy [Click here to view the article]

 

Possible bio cathode materials for usage in microbial fuel cells towards energy generation and wastewater treatment to sustain environment: A review
Baskar S., Jayaprabakar J., A R., Rajan T.S., Kumar J.A., U N.R., E B., Sambandam P., PK J., Ruban M.
Results in Engineering [Click here to view the article]

 

Reinforcing urban resilience through sound landfill management: Addressing global climatic challenges with novel solutions
Goh K.C., Kurniawan T.A., Othman M.H.D., Anouzla A., Aziz F., Ali I., Casila J.C.C., Khan M.I., Zhang D., Dai W., Onn C.W., Seow T.W.
Process Safety and Environmental Protection [Click here to view the article]

 

Augmenting the cities’ and metropolitan regional demands for mega rail infrastructure: the application of SWOT and factor analysis
Mihocic E., Gharehbaghi K., Hilletofth P., Tee K.F., Myers M.
Smart and Sustainable Built Environment [Click here to view the article]

 

Combined influence of eggshell powder and nylon fiber on self-compacting concrete production: experimental assessment and machine learning quantifications
Safayet M.A., Abdullah A.A., Islam M.F., Alahmari T.S., Sobuz M.H.R., Khan M.M.H.
Materials Research Express [Click here to view the article]

 

AI-driven Modeling for the Optimization of Concrete Strength for Low-Cost Business Production in the USA Construction Industry
Sobuz M.H.R., Saleh M.A., Samiun M., Hossain M., Debnath A., Hassan M., Saha S., Hasan R., Kabbo M.K.I., Khan M.M.H.
Engineering, Technology and Applied Science Research [Click here to view the article]

 

Experimental studies on the physical and mechanical properties of modified silica/graphene reinforced polyamide6/copolyester elastomer blend nanocomposites
Srinivas S., Ananthapadmanabha G.S., Suresha B., Nagarajan R., Mohammad F., Krishnan K., Devi M.P.I., Ahmad S.
Polymer Engineering and Science [Click here to view the article]

 

Optimization of wear behavior of additively manufactured green biocomposites from printed polylactic acid (PLA) and microcrystalline cellulose
Selwin M., Nagarajan R., Ponsuriyaprakash S., Ayrilmis N., Krishnan K., Mohammad F.
Wood Material Science and Engineering [Click here to view the article]

 

Tailoring optical and electrical properties of hybrid polymer nanodielectrics: Synthesis and characterization of CuO/TiO2 nanoparticle-embedded HPMC/NaAlg blend
Ragab H.M., Diab N.S., Khaled A.M., Aboelnaga S.M., Qasem A., Farea M.O., Morsi M.A.
Ceramics International [Click here to view the article]

 

Techno-economic assessment and multi-objective optimization of CO2 hydrogenation via geothermal energy storage using synthetic natural gas, refrigeration, and freshwater production
Hai T., Seger A.A., El-Shafay A.S., Agarwal D., Al-Yasiri A.J., Rajab H., Darweesh M.S., Kolsi L., Maatki C., Singh N.S.S.
International Journal of Low-Carbon Technologies [Click here to view the article]

 

Implications of Raychaudhuri equation and geodesic focusing in interacting two fluid systems
Chakraborty M., Chakraborty S.
European Physical Journal C [Click here to view the article]

 

A First-Principles Study of the Effect of Spin–Orbit Coupling on the Optoelectronic and Magnetic Properties of Manganese Distannide
Malki S., Larbi E.F., Baraka O., Darhi Z., Guesmi I., Ait Lahoussine Ouali H., Mandal A., Sébilleau D., Challioui A., Chong T.V.
Journal of Electronic Materials [Click here to view the article]

 

Impact of silver nanofluid modifications on heat pipe thermal performance
Dhairiyasamy R., Gabiriel D., Bunpheng W., Kit C.C.
Journal of Thermal Analysis and Calorimetry [Click here to view the article]

 

Neutron Yield Optimization from a Palm Top Plasma Focus Device Using Lee Code
Nayeem M.I., Biswas S., Islam M.K., Akel M., Lee S., Malek M.A.
IEEE Transactions on Plasma Science [Click here to view the article]

 

Optimization Energy Consumption Using Constrains Temperature and Fan Speed on Salt Dryer Machine Based on Taguchi L9 Statistics Model
Winarso K., Akhmad S., Adam R., Yusron R., Asmara Y.P., Rachmad A.
Mathematical Modelling of Engineering Problems [Click here to view the article]

 

Optimal energy generation of hybrid energy systems considering economic and environmental multi-objective functions
Raman A., Sayed B.T., Alkhayyat A., Ved A., Chetan M., Singh A., Kumar R., Prasad K.D.V., Sapaev I.B., Mohammedi M.
Science and Technology for Energy Transition (STET) [Click here to view the article]

 

Synergistic effects of titanium dioxide and graphene nanofillers on delamination and thrust forces in machining glass fiber reinforced nanocomposites
Harsha M.S., Kumar V.S.H., Prasad M.B., Muthukumar C., Thiagamani S.M.K., Ayrilmis N., Krishnasamy S., Ng L.F., Jesuarockiam N.
Scientific Reports [Click here to view the article]

 

Research on rechargeable agricultural wireless sensor network based on ZigBee immune routing repair algorithm
Tang R., Wu Y., Tan J., Guan B., Aridas N.K., Talip M.S.A.
Scientific Reports [Click here to view the article]

 

Urban water supply risks assessment under tropical climate
Shams S., Mubarak N.M., Ismail N.A.B., Khan M.M.H., Al-Mamun A., Ahsan A.
Scientific Reports [Click here to view the article]

 

Insights into the enhanced photocatalytic degradation of congo red using advanced BaDyxFe12−xO19 catalytic hexamaterials
Himanshi, Makasana J., Ganesan S., Lal B., Naidu K.S., Ahmed J., Prakash J., Verma A., Lakshmaiya N., Jasrotia R., Yong X., Chan C.K.
Scientific Reports [Click here to view the article]

 

Microstructural assessment and supervised machine learning-aided modeling to explore the potential of quartz powder as an alternate binding material in concrete
Sobuz M.H.R., Kabbo M.K.I., Khatun M., Alahmari T.S., Jameel M., Khan M.M.H.
Case Studies in Construction Materials [Click here to view the article]

 

Effect of copper nanoparticle volume fraction on flow in a 3D lid-driven cavity with phase change materials using molecular dynamics simulation
Sawaran Singh N.S., Hassan W.H., Thiab R.F., Al-zahy Y.M.A., Salahshour S., Hekmatifar M.
Case Studies in Chemical and Environmental Engineering [Click here to view the article]

 

Topotactic synthesis of shape-tuned MoS2 nanorods as self-template interfacial ensemble-induced catalysis towards degradation of organic pollutants
Khan S.S., Steffy J.P., Swedha M., Syed A., Elgorban A.M., Abid I., Wong L.S.
Materials Chemistry and Physics [Click here to view the article]

 

Carbon-doped percentage effect on the mechanical properties of nanoporous silicon sample using molecular dynamics simulation
Sawaran Singh N.S., Ali A.B.M., Ameen H.F.M., Al-Zahiwat M.M., Salahshour S., Emami N.
Case Studies in Chemical and Environmental Engineering [Click here to view the article]

 

Innovative ferrite sensors: Advancing non-enzymatic glucose detection
Jasrotia R., Raj K., Singh B., Alluhayb A.H., Younis A.M., Suman, Ramya M., Kandwal A., Khanna V., Singh V.P., Kit C.C.
Sensors and Actuators Reports [Click here to view the article]

 

A Hybrid Mesoporous Sulphur-doped CoMn Oxide @ Cobalt Alginate-derived Carbon Spongy-like Beads for Methylene Blue Decolorization: Isotherm, Kinetic, and Machine Learning Modeling
Thabet M., El-Monaem E.M.A., Mouhafid M., Abdel-Lateef M.A., Seaf-Elnasr T.A., Alruwaili Y.M.A., Alanazi A.H., Ali H.M., Mohamed A., Cheira M.F., Gomaa H.
Environmental Processes [Click here to view the article]

 

Coupling effects of strain gradient and surface energy on dynamic instability of small-scale timoshenko beams traversed by sequential moving nanoparticles
Sawaran Singh N.S., Ali A.B.M., Abed Hussein M., Mohammed J.K., Kharraji O., Pirmoradian M., Hashemian M., Salahshour S.
Case Studies in Chemical and Environmental Engineering [Click here to view the article]

 

Enhancing the performance of As-Se-S thin films through thermal and electrical property optimization
El-Saeedy H.I., Qasem A.
Physica B: Condensed Matter [Click here to view the article]

 

Designing of ternary double Z-scheme Ni3(VO4)2/Cu2O/CoMoS2 nano-heterojunction for visible light-induced photocatalytic degradation of levofloxacin: Kinetics, degradation pathway and toxicity assessment
Khan S.S., Steffy J.P., Swedha M., Syed A., Elgorban A.M., Abid I., Wong L.S.
Journal of the Taiwan Institute of Chemical Engineers [Click here to view the article]

 

Structural impact resilience of lightweight fiber-reinforced LECA concrete using ANN and RSM technique
Ja'e I.A., Muda Z.C., Almujibah H., Amaechi C.V., Syamsir A., Alengaram U.J., Elshekh A.E.A., Bashir M.O.
Construction and Building Materials [Click here to view the article]

 

Enhancing solar water desalination with wax infused glass for sustained distillate yield
Dumka P., Siddiqui M.I.H., Sharma K., Chan C.K., Dobrotă D.
Desalination and Water Treatment [Click here to view the article]

 

Unveiling the enhanced rhodamine B degradation in water by Sn3O4@Au: Insight into degradation pathway and by-products toxicity evaluation
Safa M.B., Steffy J.P., Syed A., Subhiksha V., Elgorban A.M., Verma M., Wong L.S., Khan S.S.
Journal of Water Process Engineering [Click here to view the article]

 

Foaming in wastewater treatment plants: Deciphering biological foaming and challenges in MBR systems
Ibrahim M., Dayarathne H.N.P., Lim J.W., Paudel S.R., Shahid M.K., Mainali B.
Journal of Water Process Engineering [Click here to view the article]

 

Energy Consumption, Industrialization, and Carbon Emission Risks in Malaysia
Musa K., Erum N., Ghapar F.A., Somthawinpongsai C., Said J.
Environmental Quality Management [Click here to view the article]

 

A circular economy approach to energy recovery from polymer waste with oxygenated additives as a sustainable fuel
Baskar S., S P., Raman A., M V., S G., Kumar K.M., S M.
Results in Engineering [Click here to view the article]

 

Effect of atomic porosity on the mechanical properties of aluminium polycrystalline using molecular dynamics simulation
Sawaran Singh N.S., Ali A.B.M., Ameen H.F.M., Fahem A.S., Salahshour S., Eftekhari S.A.
Results in Engineering [Click here to view the article]

 

Enhancing machining efficiency of UNS S45000 alloy steel using cryogenically treated TiAlSiN coated tungsten carbide inserts
Baskar S., A R., M K., N L., Kumar R., Rohini B., Chandrasekaran M., A U.D., Sudharsan M.S., Ruban M.
Results in Engineering [Click here to view the article]

 

In situ growth of carbon quantum dots on acid/base 3D Co2VO4 nanoplates to regulate photocatalysis and peroxymonosulfate activation towards highly efficient degradation of ciprofloxacin
Jiteshwaran T., Steffy J.P., Janani B., Syed A., Elgorban A.M., Abid I., Wong L.S., Khan S.S.
Journal of Water Process Engineering [Click here to view the article]

 

Assessing the feasibility of climate change-induced energy consumption in the industrial sector of Bangladesh
Bagdadee A.H., Dewi D.A., Varadarajan V., Mondal A.U., Zhang L.
Environmental Research Communications [Click here to view the article]

 

How Digital Empowerment Promotes Rural Autonomous Governance? - A Case Study of Houwei Village, Xingdian Street, Pukou District, Nanjing
Li X., Yang Z., Liu Y.
E3S Web of Conferences [Click here to view the article]

 

Comparative study of ARC elongation of flat and inclined splitter plates in arc chamber of moulded case circuit breaker
Tumane M., Thakre P., Katare P., Ingle A.
Sigma Journal of Engineering and Natural Sciences [Click here to view the article]

 

Barriers to the Adoption of Augmented Reality Technologies for Education and Training in the Built Environment: A Developing Country Context
Akinradewo O., Hafez M., Aliu J., Oke A., Aigbavboa C., Adekunle S.
Technologies [Click here to view the article]

 

AFM and Raman Studies of Chemical Bath Deposited Nickel Sulphide Films
Soonmin H., Mohanraj K.
International Journal of Engineering Trends and Technology [Click here to view the article]

 

Recent Advances in the Development of Thin Films for the Solar Cell Applications
Soonmin H.
International Journal of Engineering Trends and Technology [Click here to view the article]

 

Investigation of Nanostructured Thin Films Using Scanning Electron Microscopy Technique
Ho S., Ejikeme E.I.
International Journal of Engineering Trends and Technology [Click here to view the article]

 

Development of Hybrid Electrode for Welding Using Nano Additives from Agro-wastes
Afolalu S.A., Ogedengbe T.S., Oke-Owo T.A., Ting T.T.
Revue des Composites et des Materiaux Avances [Click here to view the article]

 

Leading the Industry Revolution 5.0 transformation: A technology roadmap for Industry Revolution 5.0
Leong W.Y.
Industry 5.0: Design, standards, techniques and applications for manufacturing [Click here to view the article]

 

Application and contribution of virtual reality technology in education
Peng G., Leong W.Y.
Industry 5.0: Design, standards, techniques and applications for manufacturing [Click here to view the article]

 

Industry 5.0 and personalised education: Application of intelligent technology in the optimisation of vocational education resources and improvement of teaching methods
Zhang H., Leong W.Y.
Industry 5.0: Design, standards, techniques and applications for manufacturing [Click here to view the article]

 

Employment status analysis and response strategies of students majoring in mechanical manufacturing and automation in vocational colleges under the background of Industry 5.0
Li Y., Leong W.Y.
Industry 5.0: Design, standards, techniques and applications for manufacturing [Click here to view the article]

 

Industry 5.0: Design, standards, techniques and applications for manufacturing
Leong W.Y.
Industry 5.0: Design, standards, techniques and applications for manufacturing [Click here to view the article]

 

Insights from Industry 5.0 on the cultivation of engineering talent based on industrial needs
Cheng Z., Leong W.Y.
Industry 5.0: Design, standards, techniques and applications for manufacturing [Click here to view the article]

 

AI technology drives film industry into the 5.0 era
Gao M., Leong W.Y.
Industry 5.0: Design, standards, techniques and applications for manufacturing [Click here to view the article]

 

Carbon emission under Industry 5.0
Tang Z.F., Leong W.Y.
Industry 5.0: Design, standards, techniques and applications for manufacturing [Click here to view the article]

 

BIM risk evaluation for comprehensive management corridor projects
Yang F., Leong W.Y.
Industry 5.0: Design, standards, techniques and applications for manufacturing [Click here to view the article]

 

Integrating artificial intelligence into pedagogy: Theoretical framework and application model of I-TPACK in intelligent education
Naixin Z., Leong W.Y.
Industry 5.0: Design, standards, techniques and applications for manufacturing [Click here to view the article]

 

Comparative Performance and Emission Analysis of Soybean and Algae Biodiesels in Low Heat Rejection Engines
Dhairiyasamy R., Bunpheng W., kit C.C., Hasan N.
Energy Science and Engineering [Click here to view the article]

 

Enhancing net zero decarbonization strategies: a comparative analysis with the analytic hierarchy process
Raman A., Altalbawy F.M.A., Ali A., Vora T., Alkhayyat A., Yogi K.S., Sapaev I.B., Dhaliwal A.S., Singh A., Shafieezadeh M.M.
International Journal of Low-Carbon Technologies [Click here to view the article]

 

Review on Recent Advances in Fractional Differentiation and its Applications
Hafez M., Alshowaikh F., Voon B.W.N., Alkhazaleh S., Al-Faiz H.
Progress in Fractional Differentiation and Applications [Click here to view the article]

 

Issues Facing Implementation of Edo State Public Procurement Law in Construction Projects: Threat to Achieving Sustainable Development Goal 11
Hafez M.A., Ebekozien A., Umaigba G.I., Thwala W.D., Muda Z.C.
Environment and Social Psychology [Click here to view the article]

 

Analysis of Graduate Students Using Machine Learning to Forecast Student’s Employability and Academic Success
Ritonga M., Rao P.K., Alyamani K.A.Z., Naved M., Jawarneh M., Kumar P.R.
Advances in Science, Technology and Innovation [Click here to view the article]

 

Multi-objective optimization evaluation of renewable and clean methanol synthesis
Hai T., Hamed Rasheed R., Sharma A., Dhawan A., Sharma P., Rajab H., Becheikh N., Aich W., Kolsi L., Singh N.S.S.
International Journal of Low-Carbon Technologies [Click here to view the article]

 

Evaluating the Influence of Cenosphere Extraction on Physicochemical and Mechanical Performance of Residual Pulverised Fly Ash (RPFA) Incorporated Concrete
Jae I.A., Norsalam A.A., Shaik Ahmad Fadzil S.M.M., Itam Z., Syamsir A., Zahari N.M., Zawawi M.H., Che Muda Z., Mehamod F.S.
Springer Proceedings in Physics [Click here to view the article]

 

Twenty-two years of advancements in augmented and virtual reality: a bibliometric and systematic review
Angra S., Jangra S., Gulzar Y., Sharma B., Singh G., Onn C.W.
Frontiers in Computer Science [Click here to view the article]

 

Predictive modelling of peroxisome proliferator-activated receptor gamma (PPARγ) IC50 inhibition by emerging pollutants using light gradient boosting machine
Awomuti A., Yu Z., Adesina O., Samuel O.W., Mumbi A.W., Yin D.
SAR and QSAR in Environmental Research [Click here to view the article]

 

Appraising young-adult internal migrants into construction craftsmanship: issues surrounding skill acquisition and competencies in Nigeria
Ebekozien A., Nwaole A.N.C., Aigbavboa C.O., Ahmed M.A.H., Samsurijan M.S., Thwala W.D., Ikuabe M.O.
Engineering, Construction and Architectural Management [Click here to view the article]

 

Examining the mechanical properties of hybrid curauá-basalt reinforced polyester composites
Krishnasamy S., Irulappasamy S., Thiagamani S.M.K., Ilyas R.A., Khoo P.S.
Polymer Composites [Click here to view the article]

 

Efficiency optimization of quantum dot photovoltaic cell by solar thermophotovoltaic system
Talha H.M., Rana A.S., Shahid S., Khan W., Naeem T., Aslam M., Bahajjaj A.A.A., Asghar A.B., Conka Z., Stefko R.
Nanotechnology Reviews [Click here to view the article]

 

Investigating evolving wormholes in f (R,T) gravity
Roy D., Dutta A., Ghosh B., Chakraborty S.
International Journal of Modern Physics A [Click here to view the article]

 

Correction to: A First-Principles Study of the Effect of Spin–Orbit Coupling on the Optoelectronic and Magnetic Properties of Manganese Distannide (Journal of Electronic Materials, (2025), 54, 3, (2219-2228), 10.1007/s11664-024-11729-y)
Malki S., El Farh L., Baraka O., Darhi Z., Guesmi I., Ait Lahoussine Ouali H., Mandal A., Sébilleau D., Challioui A., Chong T.V.
Journal of Electronic Materials [Click here to view the article]

 

Design of a Smart Home Door Security System with Face Detection and Smart Bell using ESP32-CAM
Salsabila N., Siswanto A., Bayuaji L.
6th International Conference on Mobile Computing and Sustainable Informatics, ICMCSI 2025 - Proceedings [Click here to view the article]