Welcome to INTI International University's Research Publications in the Engineering & Innovation Technology category. Our publications showcase groundbreaking research and advancements in various engineering fields. Explore the cutting-edge work of our faculty and researchers in areas such as robotics, materials science, renewable energy, environmental engineering, water management and waste management, geotechnics and transportation, sustainable manufacturing, plasma research, superconducting, and more. Stay up to date with the latest trends and innovations shaping the future of technology. Each publication entry provides a link, allowing you to delve into the research that captures your interest. Start exploring today and unlock the potential of engineering and technology at INTI International University.

2024 | 2023 | 2022 | 2021 | 2020 | 2019

---

 

Development Of Machine Learning Models For Prediction Of It Project Cost And Duration
Pang, D.-J., Shavarebi, K., Ng, S.
2022 12th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2022 [Click here to view the article]

 

Ab Initio Investigation Of The Hydrogen Interaction On Two Dimensional Silicon Carbide
Nguyen P.M., Van Nguyen H., Lam V.T., Nhu Duong T.T., Chong T.V., Tran H.T.T.
ACS Omega [Click here to view the article]

 

Bottom Ash as Inventive Recyclable Material in Determination Construction Industries towards IR 4.0
Rahman N.A., Adam G., Gunesegeran K., Pin L.H., Rahim J.A., Ghani K.D.A.
AIP Conference Proceedings [Click here to view the article]

 

Failure Behaviour of Expanded Lightweight Concrete Wall (EPS-LWC) with Opening and Pinned Ends Support
Rahim J.A., Rahman N.A.
AIP Conference Proceedings [Click here to view the article]

 

High-Density Polyethylene (HDPE) Tiles
Gunesegeran K., Annamalai R., Ma'arof M.I.N., Rahman N.A., Nadarajan N.
AIP Conference Proceedings [Click here to view the article]

 

Remaining strength prediction of reinforced steel bar concrete structure in seawater environment
Asmara Y.P., Nor M.I., Anwar S.N.R., Sugiman S.
AIP Conference Proceedings [Click here to view the article]

 

E ffects of carbon nanotubes addition on the superconducting properties and critical current density of NdBa2 Cu3 O 7−δ
Swee-Hua Erin Lim
Applied Physics A: Materials Science and Processing [Click here to view the article]

 

Results of plasma radiative compression investigation in the PF-24 device operated with D2, Ar and (100%-x)D2+x%Ar mixtures obtained using the 5-phase Lee model code
Marciniak Ł., Akel M., Kulińska A., Lee S., Scholz M., Saw S.H.
Applied Radiation and Isotopes [Click here to view the article]

 

Recent Advances In The Growth And Characterizations Of Silar-Deposited Thin Films
Ho Soon Min
Applied Sciences (Switzerland) [Click here to view the article]

 

Study Of Behaviour Of Short Concrete Columns Confined With PVC Tube Under Uniaxial Load
Ammar A. Hammadi; Faidhalrahman Khaleel; Haitham Abdulmohsin Afan; Md Munir Hayet Khan; Ayad Abdul Hammed Sulaibi
Applied Sciences (Switzerland) [Click here to view the article]

 

The Effect Of Surface Hardening On The Hq 705 Steel Camshaft Using Static Induction Hardening And Tempering Method
Sri Nugroho, Deni Fajar Fitriyana, Rifky Ismail, Thesar Aditya Nurcholis, Tezara Cionita, Januar Parlaungan Siregar
Automotive Experiences [Click here to view the article]

 

Determining Concrete Structure Condition Rating Based On Concrete Compressive Strength
Henny Wiyanto, Chaidir Anwar Makarim , Onnyxiforus Gondokusumo, Januar Parlaungan Siregar, Agustinus Purna Irawan, Tezara Cionita and Najid Najid
Buildings [Click here to view the article]

 

Influence Of Different Ambient Temperatures On The Thermal Properties Of Fiber-Reinforced Structural Lightweight Aggregate Concrete
P. Shafigh, M. Hafez, Zakaria Che Muda, S. Beddu, As’ad Zakaria, Zaher Almkahal
Buildings [Click here to view the article]

 

Electrochemical And Material Characteristics Of Ba0.5Sr0.5Co0.8Fe0.2O3−δ-Sm0.2Ce0.8O1.9 Carbonate Perovskite Cathode Composite For Low-Temperature Solid Oxide Fuel Cell
Tan Kang Huai, Hamimah Bin Abd.Rahman, Muhammad Saifudin Bin Azami, Umira Asyikin Binti Yusop, Nurul Akidah Binti Baharuddin, Muhammad Izzat Bin Nor Ma'arof
Ceramics International [Click here to view the article]

 

Rejuvenation Of Aged Asphalt Binders By Waste Engine Oil And Sbs Blend: Physical, Chemical, And Rheological Properties Of Binders And Mechanical Evaluations Of Mixtures
Ahmed Eltwati , Azman Mohamed, Mohd Rosli Hainin, Euniza Jusli, Mahmoud Enieb
Construction and Building Materials [Click here to view the article]

 

Photon-to-photon polarization modulation using Mxene thin film as modulator
Z. C. Tiu,1, S. J. Tan, M. Z. Samion, N. Yusoff, H. Ahmad, S. W. Harun
Electronics Letters [Click here to view the article]

 

Rare-Earth Composite As Optical Upconversion Temperature Sensor
Wan Ying Xie, Peng Zhang, Hong Fang Lai, Yin Ling Lai, Zian Cheak Tiu
Electronics Letters [Click here to view the article]

 

A Review Of On-Line Measurement Methods Of Alkali Metal Emissions From Combustion By Passive Spontaneous Emission Spectroscopy
Weihui Liao, Chao Yan, Xingcheng Lyu, Yang Pu, Chun Lou, Mooktzeng Lim
Energies [Click here to view the article]

 

Valorization of spent brewery yeast biosorbent with sonication-assisted adsorption for dye removal in wastewater treatment
Soh E.Y.S., Lim S.S., Chew K.W., Phuang X.W., Ho V.M.V., Chu K.Y.H., Wong R.R., Lee L.Y., Tiong T.J.
Environmental Research [Click here to view the article]

 

Hydrological safety of vaturu dam by evaluating spillway adequacy
Mohammad M., Pagkale P.J., Abd Rahman N.F., Mohmad Shariff M.S.
Eurasia Proceedings of Science, Technology, Engineering and Mathematics [Click here to view the article]

 

Statistical analysis of 30 year rainfall data: A case study for langat river basin
Abd Rahman N.F., Hisham N., Mohammad M., Tai V.C., Khalid K., Mohmad Sharif M.S.
Eurasia Proceedings of Science, Technology, Engineering and Mathematics [Click here to view the article]

 

Formaldehyde Sensing Using Tapered U-Shape Plastic Optical Fiber Coated With Zinc Oxide Nanorods
Johari S.H., Cheak T.Z., Rahim H.R.A., Jali M.H., Yusof H.H.M., Johari M.A.M., Harun S.W.
IEEE Access [Click here to view the article]

 

Tungsten disulfide coated side-polished fibre as polarisation state modulator in all-optical system
Zian Cheak Tiu, Sin Jin Tan, Muhamad Zharif Samion, Harith Ahmad, Sulaiman Wadi Harun and Chee Leong Tan
IET Optoelectronics [Click here to view the article]

 

Performance Analysis Of Blended Tyre Pyrolysis Oil (TPO) Against Diesel In A Yanmar Tf-120 Single Cylinder Diesel Engine
Lim Jin Wei,Rishinddren Mathialagan,Muhammad Izzat Nor Ma’arof,Girma Tadesse Chala
International Journal of Applied Engineering and Technology (London) [Click here to view the article]

 

Analysis and Optimization of an Aftermarket Intercooler Spray‟s Nozzle
M. I. N. Ma’arof , Usman Shahid, Girma T. Chala, Sathurshan Sureash
International Journal of Emerging Technology and Advanced Engineering [Click here to view the article]

 

Anti-Lift Assessment Of Multi-Flap Motorcycle Winglet For Track Usage Via Wind Tunnel Test
Muhammad Izzat Nor Ma’arof, Nurfarah Aqilah Zainal Kamarudin, Girma Tadesse Chala, Timur Izmailov
International Journal of Emerging Technology and Advanced Engineering [Click here to view the article]

 

Topology Optimization Of An Engine Mounting Bracket
M. I. N. Ma'arof, H Husain, JB Saedon, NHM Nor, MS Meo, Girma T. Chala, Muhammad Abdul Wahab
International Journal of Emerging Technology and Advanced Engineering [Click here to view the article]

 

Solar Energy Development: Study Cases In Iran And Malaysia
Ho Soonmin and Masoud Taghavi
International Journal of Engineering Trends and Technology [Click here to view the article]

 

PROJECT RISK RANKING BASED ON PRINCIPAL COMPONENT ANALYSIS – AN EMPIRICAL STUDY IN MALAYSIA-SINGAPORE CONTEXT
Pang D.-J., Shavarebi K., Ng S.
International Journal of Innovative Computing, Information and Control [Click here to view the article]

 

Effect of Stacking Sequences, Fabric Orientations, and Chemical Treatment on the Mechanical Properties of Hybrid Woven Jute–Ramie Composites
Tezara C., Zalinawati M., Siregar J.P., Jaafar J., Hamdan M.H.M., Oumer A.N., Chuah K.H.
International Journal of Precision Engineering and Manufacturing - Green Technology [Click here to view the article]

 

Graphene-mediated suppression of Leidenfrost effect for droplets on an inclined surface
Lim E., Ng B.T., Hung Y.M., Tan M.K.
International Journal of Thermal Sciences [Click here to view the article]

 

A Review of Metal Oxide Thin Films in Solar Cell Applications
Ho Soon Min
International Journal of Thin Film Science and Technology [Click here to view the article]

 

Characterization Of Cobalt Selenide Films Using FESEM And EDX
Ho Soon Min
International Journal of Thin Film Science and Technology [Click here to view the article]

 

Lead-Free Perovskite Materials For Solar Cell: An Update Of Recent Trends
Ho, S.M., Hassan, I.
International Journal of Thin Film Science and Technology [Click here to view the article]

 

Opto-Electrical Properties Of Chemical Bath Deposited Cu4Sns4 Thin Films
Ho Soon Min, Duke Oeba , Evans Makori , Mathew Munji and Walter Njoroge
International Journal of Thin Film Science and Technology [Click here to view the article]

 

Thermo-mechanical efficiency of fibre-reinforced structural lightweight aggregate concrete
Shafigh P., Muda Z.C., Beddu S., Zakaria A., Almkahal Z.
Journal of Building Engineering [Click here to view the article]

 

Soliton Picosecond Pulse Generation With A Spin-Coated Pedot: Pss Thin Film
Ahmed Shakir Al-Hiti, Moh Yasin, Zian Cheak Tiu, Sulaiman Wadi Harun
Journal of Luminescence [Click here to view the article]

 

Open Innovation in Developing an Early Standardization of Battery Swapping According to the Indonesian National Standard for Electric Motorcycle Applications
Sutopo W., Prianjani D., Fahma F., Pujiyanto E., Rasli A., Kowang T.O.
Journal of Open Innovation: Technology, Market, and Complexity [Click here to view the article]

 

Effect of atomic number and pressure on plasma pinch properties and characteristic soft x-ray emission in PF1000
Malek M.A., Huda M.N., Islam M.K., Lee S.
Journal of Physics Communications [Click here to view the article]

 

Architectural Value in Tanggam System on the Traditional Malay House
Rahman N.B.A., Ahmad M.H., Daud R., Rahim S.A.A., Sharkawi N., Abdullah S., Arshard W.N.R., Mahdzar S.S.S.
Lecture Notes in Civil Engineering [Click here to view the article]

 

Bamboo Reinforced Concrete Beam
Rahman N.A., Rong C.L., Pin L.H.
Lecture Notes in Civil Engineering [Click here to view the article]

 

Investigation of Catalyzed Biomass Thermoelectric Concrete with Palm Oil Fuel Ash
Lee H.-P., Chak W.-F., Teow K.-L., Lee W.-Z., Rahman N.B.A., Awang A.Z.
Lecture Notes in Civil Engineering [Click here to view the article]

 

Removal Of Nutrients, Organic Matter And Total Suspended Solids From River Water By Adsorption On Chicken Eggshell
Wen-Pei Low, Fung-Lung Chang, Shwu Ying Loo
Lecture Notes in Civil Engineering [Click here to view the article]

 

Sustainable Use of Plastic Waste on Laterite Soil as Stabilizer
Ibrahim N.A.B., Jun T.J., Shahrin M.I., Mat Yusof N.’A.
Lecture Notes in Civil Engineering [Click here to view the article]

 

Development of a Novel Open Platform Controller Machining Module for 3-Axis CNC Milling Machine
Adam A., Yusof Y., Latif K., Kadir A.Z.A., Sam T.-H., Ahmad M.I.
Lecture Notes in Electrical Engineering [Click here to view the article]

 

The Implementation of a Novel Augmented Reality (AR) Based Mobile Application on Open Platform Controller for CNC Machining Operation
Adam A., Yusof Y., Latif K., Kadir A.Z.A., Sam T.-H., Nazrein S., Memon D.A.
Lecture Notes in Electrical Engineering [Click here to view the article]

 

Review on Advanced CNC Controller for Manufacturing in Industry 4.0
Adam A., Sam T.-H., Latif K., Yusof Y., Khan Z., Ali Memon D., Saif Y., Hatem N., lliyas Ahmed M., Abdul Kadir A.Z.
Lecture Notes in Mechanical Engineering [Click here to view the article]

 

Characterization Of Pla/Pcl/Green Mussel Shells Hydroxyapatite (Ha) Biocomposites Prepared By Chemical Blending Methods
Rifky Ismail, Tezara Cionita, Yin Ling Lai, Deni Fajar Fitriyana, Januar Parlaungan Siregar, Athanasius Priharyoto Bayuseno, Fariz Wisda Nugraha, Rilo Chandra Muhamadin, Agustinus Purna Irawan, Agung Efriyo Hadi
Materials [Click here to view the article]

 

Integration Of Rice Husk Ash As Supplementary Cementitious Material In The Production Of Sustainable High-Strength Concrete
Noor Md. Sadiqul Hasan, Md.Habibur Rahman Sobuz, Md. Munir Hayet Khan, Nusrat Jahan Mim, Md. Montaseer Meraz, Shuvo Dip Datta, Md. Jewel Rana, Ayan Saha, Abu sayed Mohammad Akid, Md. Tanjid Mehedu, Moustafa Houda, Norsuzailina Mohamed Sultan
Materials [Click here to view the article]

 

Investigating The Effect Of PCL Concentrations On The Characterization Of PLA Polymeric Blends For Biomaterial Applications
Solechan Solechan, Agus Suprihanto, Susilo Adi Widyanto, Joko Triyono, Deni Fajar Fitriyana, Januar Parlaungan Siregar and Tezara Cionita
Materials [Click here to view the article]

 

Synthesis And Characterization Of Calcium Carbonate Obtained From Green Mussel And Crab Shells As A Biomaterials Candidate
Rifky Ismail, Tezara Cionita, Wong Ling Shing, Deni Fajar Fitriyana, Januar Parlaungan Siregar, Athanasius Priharyoto Bayuseno, Fariz Wisda Nugraha, Rilo Chandra Muhamadin, Ramli Junid and Nor Azam Endot
Materials [Click here to view the article]

 

All-Optical Modulation Technology Based On 2D Layered Materials
Hongyan Yang ; Yunzheng Wang ; Zian Cheak Tiu, Sin Jin Tan, Libo Yuan ; Han Zhang
Micromachines [Click here to view the article]

 

Case Study On Analyses Of Slope Riverbank Failure
Nazaruddin Abdul Taha, Mohamad Shakri Mohmad Shariff, Mohd Azizul Ladin
Modelling and Simulation in Engineering [Click here to view the article]

 

Project Practitioner Experience In Risk Ranking Analysis – An Empirical Study In Malaysia And Singapore
Pang, D.-J., Shavarebi, K., Ng, S.
Operations research and Decisions (ORD) [Click here to view the article]

 

Effect Of Max Phase Chromium Aluminum Carbide Thin Film Thickness On Q-Switched Erbium-Doped Fiber Lasers
Mustafa Mohammed Najm, Ahmed Shakir Al-Hiti, Bilal Nizamani, Mohammed Najm Abdullah, A. H.A. Rosol, Pei Zhang, Sarah Mohammed Najm, Hamzah Arof, Zian Cheak Tiu, Moh Yasin, Sulaiman Wadi Harun
Optical Fiber Technology [Click here to view the article]

 

Review: Dark Pulse Generation In Fiber Laser System
Z. C. Tiu, S.W. Harun, H. Ahmad, M. Z. Samion, S. J. Tan
Optics and Laser Technology [Click here to view the article]

 

Q-Switched Fiber Laser In C-Band Region Using Metal Ceramic-Based Saturable Absorber
Abdulkadir Mukhtar Diblawe, Mustafa Mohammed Najm, Bilal Nizamani, Ahmad Haziq Aiman Rosol, Abdullahi Mohamed Samatar, Kaharudin Dimyati, Moh Yasin, Zian Cheak Tiu, Sulaiman Wadi Harun
Optik [Click here to view the article]

 

Parametric Investigation of Empty Fruit Bunch Gasification using Response Sur-face Methodology
Chala G.T., Liew C.L., Sulaiman S.A., Inayat M., Guangul F.M.
Petroleum and Coal [Click here to view the article]

 

ZnO Nanorods Coated Tapered U-Shape Plastic Optical Fiber For Relative Humidity Detection
Siti Halma Johari, Tiu Zian Cheak, Hazli Rafis Abdul Rahim, Mohd Hafiz Jali, Haziezol Helmi Mohd Yusof, Md Ashadi Md Johari, Moh Yasin, Sulaiman Wadi Harun
Photonics [Click here to view the article]

 

Mass Transfer Analysis Of Total Nitrogen Adsorption From River Water Onto Tea Waste (Camellia Sinensis)
Wen-Pei Low, Jia-Min Siow, Hoong-Pin Lee, Nurharniza Abdul Rahman, Euniza Jusli, Ramadhansyah Putra Jaya
Physics and Chemistry of the Earth [Click here to view the article]

 

ANALYSIS OF CURRENT CONDITION OF HERITAGE MASJID IN NEGERI SEMBILAN
Siti Azira Abd Rahim, Noor Hayati Ismail, Nurul Syala Abd Latip
Planning Malaysia [Click here to view the article]

 

Thermonuclearizing the plasma focus-converting plasma focus fusion mechanism from beam-gas target to thermonuclear
Lee S.
Plasma Physics and Controlled Fusion [Click here to view the article]

 

Pushing the limits of existing plasma focus towards 1016 fusion neutrons with Q = 0.01
LEE S.
Plasma Science and Technology [Click here to view the article]

 

An Experimental Investigation Into Mechanical And Thermal Properties Of Hybrid Woven Rattan/Glass-Fiber-Reinforced Epoxy Composites
Agustinus Purna Irawan, Paula Tjatoerwidya Anggarina, Didi Widya Utama, Najid Najid, Mohd Zulkfly Abdullah, Januar Parlaungan Siregar, Tezara Cionita, Deni Fajar Fitriyana, Jamiluddin Jaafar, Agung Efriyo Hadi and Teuku Rihayat
Polymers [Click here to view the article]

 

Fabrication of a Double Core–Shell Particle-Based Magnetic Nanocomposite for Effective Adsorption-Controlled Release of Drugs
Manzoor Hussain,Touseef Rehan,Khang Wen Goh,Sayyed Ibrahim Shah,Abbas Khan, Long Chiau Ming, Nasrullah Shah
Polymers [Click here to view the article]

 

Overview Of The Important Factors Influencing The Performance Of Eco-Friendly Brake Pads
Agustinus Purna Irawan, Deni Fajar Fitriyana, Cionita Tezara, Januar Siregar, Dwinita, Gregorius, Mohd Zulkfly, Ramli Junid, Agung Efriyo Hadi, Mohammad Hazim and Najid
Polymers [Click here to view the article]

 

Potentiality Of Utilizing Woven Pineapple Leaf Fibre For Polymer Composites
Agung Efriyo Hadi, Januar Parlaungan Siregar, Tezara Cionita, Mohd Bakeri Norlaila, Muhammad Amin Mohd Badari, Agustinus Purna Irawan, Jamiluddin Jaafar, Teuku Rihayat, Ramli Junid, Deni Fajar Fitriyana
Polymers [Click here to view the article]

 

The Influence Of Filler Loading And Alkaline Treatment On The Mechanical Properties Of Palm Kernel Cake Filler Reinforced Epoxy Composites
Tezara Cionita, Januar Parlaungan Siregar, Wong Ling Shing, Cheng Wan Hee, Deni Fajar Fitriyana, Jamiluddin Jaafar, Ramli Junid, Agustinus Purna Irawan and Agung Efriyo Hadi
Polymers [Click here to view the article]

 

Techno-Economic Analysis Of An Integrated Bio-Refinery For The Production Of Biofuels And Value-Added Chemicals From Oil Palm Empty Fruit Bunches
Kean Long Lim, Wai Yin Wong, Nowilin James Rubinsin, Soh Kheang Loh, Mook Tzeng Lim
Processes [Click here to view the article]

 

Rare-Earth Yttrium Oxide As Q-Switcher In Fiber Laser System
N.F. Zulkipli, A.R. Muhammad, A.H.A. Rosol, A. Altuncu, M. Yasin, Z.C. Tiu, S.W. Harun
Results in Optics [Click here to view the article]

 

Development Of Polarization Modulator Using MXene Thin Film
Zian Cheak Tiu, Sin Jin Tan, N. Yusoff & Harith Ahmad
Scientific Reports [Click here to view the article]

 

Ultrafast fiber laser at 1570 nm based on organic material as saturable absorber
Ahmed Shakir Al-Hiti, Zian Cheak Tiu, M. Yasin, S.W. Harun
Scientific Reports [Click here to view the article]

 

Co-Pyrolysis Of Plastics And Food Waste Mixture Under Flue Gas Condition For Bio-Oil Production
Huei Yeong Lim, Shu Hui Tang, Yee Ho Chai, Suzana Yusup, Mook Tzeng Lim
Sustainable Energy Technologies and Assessments [Click here to view the article]

 

Low-Cost Adsorbents for the Removal of Phenol/Phenolics, Pesticides, and Dyes from Wastewater Systems: A Review
Ho Soon Min
Water (Switzerland) [Click here to view the article]