Welcome to INTI International University's Research Publications in the Engineering & Innovation Technology category. Our publications showcase groundbreaking research and advancements in various engineering fields. Explore the cutting-edge work of our faculty and researchers in areas such as robotics, materials science, renewable energy, environmental engineering, water management and waste management, geotechnics and transportation, sustainable manufacturing, plasma research, superconducting, and more. Stay up to date with the latest trends and innovations shaping the future of technology. Each publication entry provides a link, allowing you to delve into the research that captures your interest. Start exploring today and unlock the potential of engineering and technology at INTI International University.

2024 | 2023 | 2022 | 2021 | 2020 | 2019

---

 

Doping of erbium(Iii) oxide nanoparticles–polymer interfaces in biodegradable inorganic solid polymer electrolytes for enhanced ionic conductivity
Chong M.Y., Evyan Y.C.Y., Zebardastan N., Kumar K., Ramesh K., Ramesh S.
International Journal of Nanoelectronics and Materials[Click here to view the article]

 

ZnO nanorod-coated tapered plastic fiber sensors for relative humidity
Harith, Z., Batumalay, M., Irawati, N., Harun, S. W., Ahmad, H., & Hu, T
Optics Communications[Click here to view the article]

 

Dual phase role of composite adsorbents made from cockleshell and natural zeolite in treating river water
Siti Nur Fatihah Moideen, Mohd Fadhil Md Din, Shahabaldin Rezania, Mohanadoss Ponraj, Azlan Abd Rahman, Low Wen Pei, Zulhilmi Ismail, Shazwin Mat Taib, Yu-You Li, Daisuke Komori
Journal of King Saud University – Science[Click here to view the article]

 

The development of an aftermarket intercooler spray for turbocharged vehicles using ethylene glycol and hyaluronic acid
M I N Ma'arof, G T Chala, Sathurshan Suresh and Shaheerthana Suresh
IOP Conference Series: Materials Science and Engineering[Click here to view the article]

 

A study on the performance analysis of bioethanol produced from sugarcane molasses in SI engine
M I N Maárof, G T Chala, D Gunness and I Saad
IOP Conference Series: Materials Science and Engineering[Click here to view the article]

 

Wavelet based hybrid ANN-ARIMA models for meteorological drought forecasting
Md. Munir Hayet Khan, Nur Shazwani Muhammad and Ahmed El-Shafie
Journal of Hydrology[Click here to view the article]

 

A method for finest ward selection for healthcare-facilities
Parsia Y., Sorooshian S., Panjehpour
Journal of General Management[Click here to view the article]

 

Experimental and numerical fitting of model parameters versus the gas pressure using six phase radiative Lee model in AECS PF-1, 2 and INTI PF for nitrogen, argon, and neon gases
Al-Hawat S., Akel M., Saw S.H., Lee S.
Contributions to Plasma Physics[Click here to view the article]

 

The Study on Thermal Environment and Airflow Pattern in an UFAD System Under a Cooling Mode
Yau Y.H., Chuah K.H., Siew M.T.
Arabian Journal for Science and Engineering[Click here to view the article]

 

Effect of Surface Modification on Mechanical Properties of Buri Palm (Corypha Utan) Fibre Composite Reinforcement
Zalinawati M., Siregar J.P., Tezara C., Jaafar J., Hamdan M.H.M., Oumer A.N., Rihayat T.
International Journal of Automotive and Mechanical Engineering[Click here to view the article]

 

An innovative hybrid steam-microwave sterilization of palm oil fruits at atmospheric pressure
Hock, Tee K.; Chala, Girma T.; Cheng, How H
INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES[Click here to view the article]

 

A Study on Nitriding Alloy Steel in INTI Plasma Focus Machine
A., Singh* and R., Jeyagopi and Teh, T.O. and S., Manmeshpal and Saw, S. H. and Lee, S. (2020)
IOP Conference Series: Materials Science and Engineering[Click here to view the article]

 

Lateral Control of Functionally Graded Composite Beam under Static Load by using Piezoelectric Layer
Abdolreza Toudehdehghan
IOP Conference Series: Materials Science and Engineering, 854 (1). pp. 1-10. ISSN 1757-899X[Click here to view the article]

 

The effectiveness of oil palm shell (OPS) as major aggregate replacement in concrete
N., Abdul Rahman* and Tan, A.S.H and F., Waqbitu and N.H., Roslan (
IOP Conference Series: Earth and Environmental Science,[Click here to view the article]

 

Efficiency of photovoltaic technology for Citronella oil distillation
N., Safitri and T., Rihayat and Suryani, . and S., Riskina and M., Jazuli and J.P., Sirega and J., Jaafar and T., Cionita* and Fitria
IOP Conference Series: Materials Science and Engineering,[Click here to view the article]

 

Bio-Nanocomposite Polyurethane / Clay / Chitosan Paints that have thermal resistance and antibacterial properties for biomedical applications
T., Rihayat and Suryani, . and S., Riskina and J.P., Sirega and J., Jaafar and T., Cionita* and Fitria
IOP Conference Series: Materials Science and Engineering[Click here to view the article]

 

Making Polyurethanes from castor oil with addition of Bentonite and Chitosan as coating paints on eco-friendly medical device applications
T., Rihayat and Suryani, . and S., Riskina and J.P., Sirega and J., Jaafar and T., Cionita* and Fitria,
IOP Conference Series: Materials Science and Engineering[Click here to view the article]

 

Static Analysis of Functionally Graded Coated Plate on Elastic Foundation Based on Levy Method
Toudehdehghan, Abdolreza*
IOP Conference Series: Materials Science and Engineering,[Click here to view the article]

 

Aqueous solid and gel electrolytes for supercapattery
Bashir S., Chong M.Y., Hina M., Kamran K., Ramesh S., Ramesh K.
Advances in Supercapacitor and Supercapattery: Innovations in Energy Storage Devices [Click here to view the article]

 

A Review on the Air Flow Behaviour in the Intake Pipe
Lim J.W., Narendran N., Chai C.E., Ma'Arof M.I.N.
IOP Conference Series: Materials Science and Engineering [Click here to view the article]

 

Construction Procurement in Industrialised Building System
Ahamad N.B., Binti Mazlan A.N., Zin R.M., Tukirin S.A.
IOP Conference Series: Materials Science and Engineering [Click here to view the article]

 

Geraniol quality improvement on citronella oil as raw material for making anti-bacterial perfumes
Rihayat T., Suryani, Hasanah U., Nurhanifa, Parlaungan Siregar J., Jaafar J., Cionita T., Fitria
IOP Conference Series: Materials Science and Engineering [Click here to view the article]

 

Green composites of natural fiber bamboo/pineapple leaf/coconut husk as hybrid materials
Suryani, Rihayat T., Nurhanifa, Siregar J.P., Jaafar J., Cionita T., Fitria
IOP Conference Series: Materials Science and Engineering [Click here to view the article]

 

Machine learning approach as an alternative tool to build a bankruptcy prediction model in banking industry
Siswoyo B., Herman N.S., Dewi D.A.
IOP Conference Series: Materials Science and Engineering [Click here to view the article]

 

Sustainable use of laterite soil as compressed cement stabilized earth block for low cost housing construction
Ibrahim N.A., Magindran T., Shahrin M.I., Yusof N.M.
IOP Conference Series: Materials Science and Engineering [Click here to view the article]

 

Synthesis and characterization of PLA-Chitosan-ZnO composite for packaging biofilms
Rihayat T., Suryani, Fitriyani C.N., Nurhanifa, Siregar J.P., Jaafar J., Cionita T., Fitria
IOP Conference Series: Materials Science and Engineering [Click here to view the article]

 

Tackling single-occupancy vehicles to reduce carbon emissions: Actionable model of drivers’ implementation intention to try public buses
Kang A.S., Jayaraman K., Soh K.-L., Wong W.-P.
Journal of Cleaner Production [Click here to view the article]

 

Investigation of the effect of different materials on convective heat transfer
Ibrahim A.A., Chong P.L., Rajasekharan V.S., Ali M.M., Zaroog O.S., Oumer A.N.
Journal of Mechanical Engineering and Sciences [Click here to view the article]

 

Application of microwave-assisted extraction coupled with dispersive liquid-liquid microextraction for the determination of polycyclic aromatic hydrocarbons in vegetables [Aplikasi pengekstrakan berbantukan mikrogelombang gandingan dengan pengekstrakan mi
Kin C.M., Hwang T.Y., Shing W.L.
Malaysian Journal of Analytical Sciences [Click here to view the article]

 

Sample preparation of TiO2 added ZnO using powder metallurgy route and its characteristics
Sutjipto A.G.E., Ti L.K., Asmara Y.P., Legowo A.
Materials Science Forum [Click here to view the article]

 

Characterisation of the woven fabric of jute, ramie and roselle for reinforcement material for polymer composite
Hamdan M.H.M., Siregar J.P., Ahmad M.R., Asghar A., Tezara C., Jamiluddin J., Zalinawati M.
Materials Today: Proceedings [Click here to view the article]

 

Mechanical properties of hybrid sugar palm/ramie fibre reinforced epoxy composites
Siregar J.P., Zalinawati M., Cionita T., Rejab M.R.M., Mawarnie I., Jaafar J., Hamdan M.H.M.
Materials Today: Proceedings [Click here to view the article]

 

An Innovative, Practical-based and Commercial-based Approach: Techno-Commerce Entrepreneurship Shaping the Outcome-based Learning
Wong W.Y., Sam T.H., Yu S.W.
Proceeding - 2020 IEEE 8th Conference on Systems, Process and Control, ICSPC 2020 [Click here to view the article]